Ceramic Pro New York Marine Packages

Ceramic Pro New York Marine Detailing Packages

Ceramic Pro New York offers protection for both the underwater and above water parts of any boat or yacht. The harsh conditions of the underwater environment is a well-known problem to boat expert and lovers. Ceramic Pro offers protection against the corrosion created by salt water and the fouling on the hull caused by the accumulation of algae and/or shells. Today’s procedures to clean the boats’ hull are exhausting and not very environmentally friendly. Our ceramic coating will make the surface so repellent to the harsh underwater elements that the cleaning process will no longer be a problem. Today, our Ceramic Pro products are protecting boats around world.

Marine Detailing Packages:

Boat/Yacht Ceramic Pro Light Treatment

For Regularly Maintained Boats

Recommended: Every 12 Months

Condition: For boats that are new or in good condition.  If you have had a full detail we recommend this service every 12 months as this keeps the protective layer of Ceramic Pro Light at 100% on the boat.

  • Wash down boat to remove dirt, mold, and rust marks
  • Apply a polish by orbital to all surfaces to give it an ultimate shine
  • Apply 2 coats Ceramic Pro Light to all fiberglass and stainless steel surfaces
  • Apply 2 coats Ceramic Pro Rain to all windows

 

New Boat/Yacht Ceramic Pro 9H Treatment

For Brand New Boats

Recommended: Every 3 Years

Condition:  Brand new boat before surfaces are contaminated

  • Wash down boat to remove dirt and dust
  • Apply 3 coats Ceramic Pro 9H to all fiberglass and stainless surfaces
  • Apply 3 coats Ceramic Pro Plastic to all plastic surfaces
  • Apply 3 coats Ceramic Pro Rain to all glass
  • If Bottom will not be painted Application of Ceramic Pro Strong to surfaces below waterline.

 

Boat/Yacht Ceramic Pro 9H Oxidation Removal, Polish & Ceramic Pro 9H Treatment

For Boats with Mild Oxidation and Faded Paint

Recommended: Every 2 Years

Condition:  For when your boat has lost its shine.  The surface becomes porous and collects dirt making it hard to keep clean.

  • Wash down boat to remove dirt, mold, and rust marks
  • Apply a one-step oxidation remover & polish with a high speed buffer and foam polishing pad
  • Scuff mark removal of hull and stern
  • Polish all stainless steel and windows
  • Apply 2 coats of Ceramic Pro 9H to all fiberglass and stainless steel surfaces
  • Apply 2 coats of Ceramic Pro Rain to all glass

 

Complete Personal Watercraft & Snowmobile Detailing Packages

  • Wash down watercraft or snowmobile to remove dirt, mold, and rust marks
  • Apply a one-step oxidation remover & polish with a high speed buffer and foam polishing pad
  • Scuff mark removal of hull and stern
  • Apply 2 coats of Ceramic Pro 9H to all fiberglass and stainless steel surfaces
  • Apply 2 coats of Ceramic Pro Plastic to all plastics

 

Note that this service could take several days to complete- prices may vary due to vessels condition and if wet or dry sanding need to be done in addition to the buffing

Ceramic Pro New York is the preferred Ceramic Pro Distributor & Certified Application Center for the New York Tri-State Area. Ceramic Pro New York can be contacted anytime at 631.940.7749 or drop us a line here.  

Paint must be fully corrected before applying a protective coating (nano-ceramic) due to the fact that once the coating is on your car it becomes a new surface on top of your clearcoat. Anything left on the paint will be locked in and require a complete polishing process to correct.

To get an accurate quote for your Ceramic Pro New York Ceramic Coating & Paint Correction, stop by our Long Island location located at: 258 Broad Hollow Road. Farmingdale, NY 11735

 

 

click